2006 Arctic Cat DVX 400 Service Manual, Page 140Get this manual

2006 Arctic Cat DVX 400 Service Manual, Page 140

ATV2202

9Adjust the handlebar in the holders to align the punch mark (B) with the mating surface of the handlebar holdersTighten first the forward cap screws (4) to specifications; then tighten the rearward cap screws (5) to specifications
ATV2200

NOTE: When installing the tie rod, the shorter end of the tie rod (1) should be directed toward the steering knucklesThe yellow surfaced nuts (2) are left-hand threadsSP418

Back to 2006 Arctic Cat DVX 400 Service Manual