2006 Arctic Cat DVX 400 Service Manual, Page 131Get this manual
3Coat the spacers (2) and the lips of the dust seals (3) with multipurpose grease; then install them in the upper pivot SP383
4Install the bearing spacer (4), dust seals (5), dust covers (6), and washers (7) into the lower armNOTE: The stamped mark on the dust seals must be directed to the outside
2Install the bearings in the upper arm pivot to depth of 12 mm (0.47 in with bearing installer and suitable spacerThe stamped side of the bearing should be directed toward the spacer (1)