2006 Arctic Cat DVX 400 Service Manual, Page 115Get this manual
3Install new dust seals and lightly coat with greaseINSTALLING
1Install the axle housing in the swing arm; then install and finger-tighten the four cap screws2Install the adjuster nut loosley; then install the brake disc applying red Loctite #271 to the Allen-head cap screwsTighten to specifications3Slide the axle into the axle housing from the right side; then apply multipurpose grease to all splined areas of the axleSP322
5On the left-side, install the concave washers (3); then apply red Loctite #271 to the threads on the axle and using the torque wrench adapter, tighten the inner axle nut to the calculated specificationNOTE: It is necessary to calculate the torque value using the following formula due to the offset of the special tool used to tighten the axle nuts