2006 Arctic Cat DVX 400 Service Manual, Page 72Get this manual

2006 Arctic Cat DVX 400 Service Manual, Page 72

1Install the spacer (3) into the oil ring groove; then install the two side rails (4)NOTE: The spacer and side rails do not have top and bottom disignationDo not allow the spacer ends to overlapB is correct 4Place clean rag over the cylinder base to prevent the piston-pin circlip from dropping into the crankcase; then install the piston, piston pin, and new circlip with the punch mark (1) on the piston directed toward the exhaust side
SP256 ATV2173

ATV2174

Back to 2006 Arctic Cat DVX 400 Service Manual