2006 Arctic Cat DVX 400 Service Manual, Page 71Get this manual

2006 Arctic Cat DVX 400 Service Manual, Page 71

18Install the alignment pins (1) and new gasket (2); then install the clutch cover using new washer gasket at position (1)Tighten the cap screws securely SP252A

2Install the starter driven gear (1), dowel pins (2), and new gasket (3); then install the cover and tighten the cap screws securelySP249

SP254 SP250

Installing Left-Side Components
NOTE: Critical torque specifications are located in Section 10

Back to 2006 Arctic Cat DVX 400 Service Manual