2006 Arctic Cat DVX 400 Service Manual, Page 70Get this manual
15Bend the washer over securely engaging the flat of the nut SP243A
13Install the spacer (3), primary driven gear assembly (1), washer (2), clutch sleeve hub (4), lock washer (14), and clutch sleeve hub nut (13) on the driveshaft
16Install the drive and driven plates one by one into the clutch hub sleeve in the perscribed orderNOTE: Be sure to install the drive plate with the inside diameter of 122.5 mm (4.82 in firstTwo different types of drive plates are usedThey are the one with the 122.5 mm (4.82 in inside diameter and seven with an inside diameter of 116.0 mm (4.5 in
KEY 123456789101112
Primary Driven Gear Washer Spacer Sleeve Hub Drive Plate #1 Drive Plate #2 Driven Plate Pressure Disc Spring Bolt Washer Bearing