2006 Arctic Cat DVX 400 Service Manual, Page 21Get this manual
Adjusting Clutch Lever Cable To adjust the cable, use the following procedure1Pull rubber protective boot away from the cable adjusters2Loosen the lock nut; then turn the adjuster to obtain 10-15 mm (0.4-0.6 in free-play measured at point (A)
Steering Components
The following steering components should be inspected periodically to ensure safe and proper operationAHandlebar grips not worn, broken, or looseBHandlebar not bent, cracked, and has equal and complete full-left and full-right capabilityCSteering post bearing assemblybearing housing not broken, worn, or bindingDBall joints not worn, cracked, or damagedETie rods not bent or crackedFKnuckles not worn, cracked, or damagedGCotter pins not damaged or missing
SuspensionShock AbsorbersBushings
The following suspension system components should be inspected periodically to ensure proper operationAShock absorber rods bent, pitted, or damagedBRubber damper cracked, broken, or missingCShock absorber body damaged, punctured, or leakingDShock absorber eyelets broken, bent, or crackedEShock absorber eyelet bushings worn, deteriorated, cracked, or missingFShock absorber spring broken or sagging