2006 Arctic Cat ATVs factory service and repair manual, Page 499Get this manual

2006 Arctic Cat ATVs factory service and repair manual, Page 499

INSTALLING
ADJUSTING

1Place the return spring into the throttle control; then place the bushing and actuator arm into positionSecure with the cap screw, lock washer, and washer
1Slide the boot back to reveal the jam nut; then loosen the jam nut

2Rotate the adjuster sleeve until 0.5-1.0 mm (0.02-0.04 in is attained2Using pair of needle-nose pliers, place the spring into position on the actuator arm

Back to 2006 Arctic Cat ATVs factory service and repair manual