2006 Arctic Cat ATVs factory service and repair manual, Page 457Get this manual
3Remove the flange nut securing the hub4Remove the brake caliper
3Install the hub assembly onto the shaft
5Remove the hub assembly
4Secure the hub assembly with the nutTighten only until snug
6Remove the four cap screws securing the brake discCLEANING AND INSPECTING
i NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary
5Secure the brake caliper to the knuckle with the two cap screwsTighten the auxiliary caliper to specificationsTighten the hydraulic caliper to specifications
1Clean all hub components