2006 Arctic Cat ATVs factory service and repair manual, Page 455Get this manual
Place the axle gasket on the axle housingRotate the axle shaft slightly to ensure proper engagement with the gear case splinesRotate the bearing housing until the brake caliper mounting holes are on the top side; then secure the axle retainer assemblyaxle assembly to the axle housing with four cap screwsTighten to specifications 3Place the shock absorber into the frame mounts and secure using the cap screws and hex nuts tightened to specifications
specification or the shock eyelet or mount WILL be damaged
4Place the brake calipers into position on the axle retainer assembly; then secure with the cap screwsTighten the auxiliary caliper to specifications and the hydraulic caliper to specifications