2006 Arctic Cat ATVs factory service and repair manual, Page 452Get this manual
7Install the wheel and tighten to specifications8Remove the ATV from the support stand and release the brake lever lock
9Check the front differential oil level and add oil as necessaryCare should be taken not to damage the brake cablelhose when laying the calipers asideDo not allow the calipers to hang from the brake cablelhose
4Remove the lower shock absorber cap screws and hex nuts; then disengage the shock absorbers from the axle housings
A CAUTION
Ensure that the rear gear case is properly supported BEFORE removing the shock absorber IassembliesI