2006 Arctic Cat ATVs factory service and repair manual, Page 370Get this manual
10Unscrew and remove the idle speed adjuster assemblyAccount for the spring and washerASSEMBLING
Install the slow jetTighten securelyInstall the main jet into the needle jet holder and tighten securely; then install the needle jet holder assembly into the carburetor and tighten securelyPlace the float assembly (with float needle valve) into position and secure to the carburetor with the float pin
1Screw the idle speed adjuster into the carburetor making sure the washer and spring are properly positioned
2Install the pilot screw, spring, washer, and
1 NOTE: Turn the pilot screw clockwise until it is