2006 Arctic Cat ATVs factory service and repair manual, Page 362Get this manual
5Tighten the rear bracket to frame bolts (from step 3) securely; then install the front and rear through-bolt nuts and tighten to specifications 6Install the front exhaust pipe with new seal ringDo not tighten the retainer nuts at this time
9Install the two upper and one lower coolant hoses and tighten the hose clamps securelyMake sure to install the two coolant hoses connected to the carburetors
Install the muffler and rear exhaust pipe assembly with new seal ring and seal bushings; then evenly tighten all the exhaust pipe retainer nuts to specifications
10Remove the tape or caps from the intake hoses checking for any dirt, hardware items, or liquids; then install the carburetors into the intake hoses and tighten the clamps securelyMake sure the carburetors are securely seated by rocking side to side after installation