2006 Arctic Cat ATVs factory service and repair manual, Page 360Get this manual
10Apply clean engine oil to the camshaft; then apply thin coat of Three Bond Sealant (pln 0636-070) (A) to the outer surface of the cap and the upper surface of the cylinder head 13Using wrench on the alternator bolt, turn the crankshaft clockwise 270' and align the "TF" mark (A) with the notch (B) in the inspection window
11Install the rocker case making sure that the rocker arms and adjuster screws do not have pressure on them; then tighten the rocker case cap screws as follows: 1-4 with washers, 0.9 kg-m (6.5 ft-lb); and 6, 1.0 kg-m (6.5 ft-lb); (A) 1.0 kg-m (7.0 ft-lb)Use the illustrated tightening sequence for cap screws 1-614Repeat steps 8-12 for the front camshaftIAll views are from the right side for the front camshaft