2006 Arctic Cat ATVs factory service and repair manual, Page 340Get this manual
4Inspect the rollers (A) and washers (C) in the spiderIf they are worn, replace the spider assembly (B) 4Install the spring spacer in the spider; then install the spring (A) in the spider grooveAssembling 1Install the ramp weights (A) and tighten nuts (B) to specifications; then check that the ramp weights swing freely
5Install the alignment pins (C); then install the clutch cover aligning the arrows (B) on the clutch cover and spiderTighten to specifications
2Place the fixed sheave on the clutch holder; then install the movable sheave, spider (A) and shoes (B) aligning the arrow (C) with the arrow (D) on the movable sheave