2006 Arctic Cat ATVs factory service and repair manual, Page 268Get this manual
Cleaning and Inspecting 1 NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary
1Clean all components
2Inspect the springs and ratchet for wear or damage3Inspect the reel and case for cracks or damageB604D
7Carefully lift the reel from the case making sure the spring does not accidentally disengage from the case
4Inspect the shaft for wear, cracks, or damage5Inspect the rope for breaks or fraying6Inspect the spiral spring for cracks, crystallization, or abnormal bends
7Inspect the handle for damage, cracks, or deteriorationAssemblingInstalling
1If removed, insert the spiral spring into the case with the outer end of the spring around the mounting lug in the case; then wind it in counterclockwise direction until the complete spring is installed1 NOTE: The spiral spring must seat evenly in the