2006 Arctic Cat ATVs factory service and repair manual, Page 108Get this manual
17Secure the clutch release arm with the cap screw coated with blue Loctite #243Tighten securely 19Tighten the cap screws in crisscross pattern to specifications
20Using the oil filter wrench, install new oil filt er
FOil Filter
1 NOTE: Steps 1-17 of the preceding sub-sections must precede this procedure1 NOTE: Lubricate all internal components with 10W-40 oil prior to installing the right-side cover
Installing Left-Side Components
AIdle Gear Assembly BMagneto Rotor 1Place the starter into position on the crankcase and secure with the cap screwsNote the position of the wiring form