2006 Arctic Cat ATVs factory service and repair manual, Page 89Get this manual
Assembling Primary Clutch CEY 1Pressure Disc 2Driven Plate 3Drive Plate 4Sleeve Hub 5Primary Gear Assy 6Washer
1 NOTE: When installing the driven plates for ease of installation, make sure they are placed onto the hub with the rounded side of the plates directed down
1Place the clutch hub upside down into the primary gear assembly
3Install the pressure plate onto the hub making sure the alignment dots are correctly positioned
2Alternately install the drive plates and driven plates onto the hub (starting and ending with drive plate) making sure the tabs with the notches are all in line with each other4Place the primary gear assembly wlclutch hub assembly in one hand, place the other hand on top of the clutch hub assembly, and flip the assembly over; then lift the primary gear assembly off the clutch hub assembly being careful not to disturb the drive plate notched tab orientation