2006 Arctic Cat ATVs factory service and repair manual, Page 82Get this manual
Inspecting Camshaft Bearing Journal
1Inspect the bearing journal for scoring, seizure marks, or pitting2If excessive scoring, seizure marks, or pitting is found, the cylinder head assembly must be replacedMeasuring Camshaft to Cylinder Head Clearance
1Remove the adjuster screws and jam nutsMeasuring Camshaft Runout
1 NOTE: If the camshaft is out of tolerance, it must be replaced
1Place the camshaft on set of blocks; then position the dial indicator contact point against the shaft and zero the indicator
2Place strip of plasti-gauge in each of the camshaft lands in the cylinder head3Place the valve cover on the cylinder head and secure with the valve cover cap screwsTighten securely2Rotate the camshaft and note runout; maximum tolerance must not exceed specificationsMeasuring Camshaft Lobe Height