2004 Arctic Cat ATVs factory service and repair manual, Page 486Get this manual
CLEANING AND INSPECTING
I NOTE: Whenever part is worn excessively, cracked, or damaged any way, replacement is necessary
2Tighten to 5.5 kg-m (40 ft-lb)
1Clean the wheels and hubs with parts-cleaning solvent
1Using an air pressure gauge, measure the air pressure in each tireAdjust the air pressure as necessary to meet the recommended inflation pressure
2Clean the tires with soap and water3Inspect each wheel for cracks, dents, or bends
4Inspect each tire for cuts, wear, missing lugs, and leaksINSTALLING
1Install each wheel on its hub
2Inspect the tires for damage, wear, or punctures