2004 Arctic Cat ATVs factory service and repair manual, Page 485Get this manual
10Secure the shock absorber to the frame with cap screw and new lock nutTighten to 4.8 kg-m (35 ft-lb)11Secure the shock absorber to the lower A-am with cap screw and new lock nutTighten to 2.8 kg-m (20 ft-lb) 12Secure the boot guard to the lower A-arm with the two cap screwsTighten securely13Install the wheel cap14Install the wheel and tighten to 5.5 kg-m (40 ft-lb)15Remove the ATV from the support stand
Wheels and Tires
KEY 1Machine Screw 2Brake Disc 3Wheel HubFront 4Hub Stud 5HubSeal 6Hex Nut 7Cotter Pin 8Wheel Assy 9TireFront 10Mounting Nut 11Valve Stem 12Valve Stem Cap 13Wheel HubRear 14TireRear
TIRE SIZE
TIRE INFLATION PRESSURE
Front and rear tire inflation pressure should be 0.35 .O psi)