2004 Arctic Cat ATVs factory service and repair manual, Page 483Get this manual
14Install the wheel cap15Install the wheel and tighten to 5.5 kg-m (40 ft-lb) 5Remove the two brake calipers (right side only) NOTE: Do not allow the brake calipers to hang from their cablelhose
6Remove the cap screws and lock nut securing the shock absorber to the frame and lower A-arm; then remove the shock absorber7Remove the cap screws securing the boot guard to the lower A-arm
16Remove the ATV from the support stand
9Remove the cap screws and lock nuts securing the knuckle to the A-armsDiscard the lock nutsREMOVING