2004 Arctic Cat ATVs factory service and repair manual, Page 395Get this manual
W NOTE: If the oil pressure is lower than specified, check for an oil leak, damaged oil seal, or defective oil pump REMOVING
W NOTE: It is not necessary to drain the engine oil for this procedure
WNOTE: If the oil pressure is higher than specified, check for too heavy engine oil weight (see Section 21, clogged oil passage, clogged oil filter, or improper installation of the oil filter
1Remove the input and output hoses from the fittings on the cooler-
Elevate and secure the hoses to avoid oil spillage
Oil Cooler
( 25013001400)
2Remove the cap screws securing the oil cooler to the frameAccount for grommets, collars7 and washers
I Oil Cooler 2Grommet 3, Cap Screw 4Collar 5Hoseclamp 6Hose (Input) 7Hose (Output) 8Fitting 9Cap Screw 100-Ring 11Fitting