2004 Arctic Cat ATVs factory service and repair manual, Page 339Get this manual
4Slowly release the friction plate and lift the plate with ratchet guide free of the recoil case; then remove the ratchet guide from the friction plate 7Carefully lift the reel from the case making sure the spring does not accidentally disengage from the case
5Remove the spring cover, spring, and shaftthe caseWear safety glasses to avoid injury
8Remove the protective cover from the starter handle and pull the rope out of the handle; then untie the knot in the rope and remove the handleIDo not remove the spiral spring unless replacement is necessaryIt should be visually inspected in place to save timeIf replacement is necessary, follow steps 9-10603