2004 Arctic Cat ATVs factory service and repair manual, Page 317Get this manual
ITo aid in installing, it is recommended that the assemblies are kept together and IN ORDER 9Remove the nut securing the rotorlflywheel (I) to the crankshaft; then install the magneto rotor remover adapter
11Remove the starter gear assembly (F) from the crankcase; then account for washer on each end of the assemblyIThere are bushings on each end of the assemblyThe bushings may stay with the assembly or in the case halves
10Using Magneto Rotor Remover (pln 0444-075), remove the rotorlflywheel assembly from the crankshaftAccount for the key; then remove the starter clutch gear assembly (H) and thrust washer