2004 Arctic Cat ATVs factory service and repair manual, Page 251Get this manual
26Disconnect the top connector at the CDI unit
29Remove the two cap screws securing the front upper engine mount to the frame
27Disconnect the stator-to-rectifierlregulator connector
30Remove the cap screw and flange nut securing the upper engine bracket to the engine; then remove the bracket3 1Remove the spark plug wire from the spark plug32Remove the shift indicator connector from the main wiring harness33Remove the cap screw securing the engine ground wire to the engine34Remove the three engine mounting through-boltsAccount for washer on the upper bolt and spacer on the lower front bolt