2004 Arctic Cat ATVs factory service and repair manual, Page 79Get this manual
Inspect the springs and ratchet for wear or damageInspect the reel and case for cracks or damageInspect the shaft for wear, cracks, or damageInspect the rope for breaks or frayingInspect the spiral spring for cracks7crystallization7 or abnormal bendsInspect the handle for damage, cracks, or deterioration 5Align the inner hook of the spiral spring with the notch in the reel
1If removed, insert the spiral spring into the case with the outer end of the spring around the mounting lug in the case; then wind it in counterclockwise direction until the complete spring is installedW NOTE: The spiral spring must seat evenly in the recoil case
6Install the ratchet onto its pln making sure the end is properly installed on the reel