2004 650 Twin Arctic Cat ATV Service Manual, Page 102Get this manual
Accessory ReceptacleConnector NOTE: This test procedure is for either the receptacle or the connectorVOLTAGE
1Set the meter selector to the D.CVoltage position2Connect the red tester lead to the redwhite wire or the positive connector; then connect the black tester lead to groundAR627D
3The meter must show battery voltageNOTE: If the meter shows no battery voltage, troubleshoot the battery, fuse, switch, or the main wiring harnessNOTE: If the meter shows battery voltage, the main wiring harness is good; proceed to test the switchcomponent, the connector, and the switch wiring harness for resistanceRESISTANCE (Switch Connector)
! CAUTION
3The meter must show battery voltageNOTE: If the meter shows no battery voltage, troubleshoot the battery, fuse, receptacle, connector, or the main wiring harness