2004 650 Twin Arctic Cat ATV Service Manual, Page 61Get this manual

2004 650 Twin Arctic Cat ATV Service Manual, Page 61

3Loosen the bevel gear (B) using an Allen wrench while holding the housing (A) in vise; then continue to turn the bevel gear (about 4-5 turns) until the internal nut is free of the holder bolts KX302

4Loosen the holder bolts, removing one; then using brass or copper mallet, drive the shaft out until the notches of the retainer nut can be seen (see step 1)KX303

DISASSEMBLING OUTPUT DRIVEN BEVEL GEAR ASSEMBLY

AT THIS POINT

Back to 2004 650 Twin Arctic Cat ATV Service Manual