2004 650 Twin Arctic Cat ATV Service Manual, Page 55Get this manual

2004 650 Twin Arctic Cat ATV Service Manual, Page 55


2Place the driven pulley assembly onto the compressor tool base engaging the dowel pins into appropriate holes in the fixed face of the assembly3Tighten the nut against Spring Holder (pn 0444-162) (C) to compress the springs; then using circlip pliers (B), remove the circlip (A)
6Wipe out excessive grease; then using standard tip screwdriver (B), dislodge the four guide pins (A)

7Remove the spacers; then thoroughly clean all parts in high flash-point solventKX280

Back to 2004 650 Twin Arctic Cat ATV Service Manual