2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 508Get this manual
3Secure the adjustment by tightening the jam nut; then slide the boot over the jam nut AF680D
3Place the two halves of the throttle control onto the handlebars and secure with the two machine screws
0732-412
Gearshift Pedal
(Manual Transmission)
ADJUSTING
1Slide the boot back to reveal the jam nut; then loosen the jam nut
The gearshift pedal is attached to ratchet mechanism in the transmissionEach time gear is selected, the gearshift pedal will return to its normal position ready to select the next gearTo return to neutral, press down repeatedly (once for each gear) on the front of the pedalShift into gears by pressing down on the back of the pedal once for each gearThe ratchet mechanism makes it impossible to upshift or downshift more than one gear at time