2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 500Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 500

REMOVING
1Unplug the three-prong connector and free the taillight wiring harness from the fraIlle2Remove the torx-head cap screws securing the taillight assembly to the fraIlleAccount for any washers3Remove the taillight assemblyINSPECTING

7Adjust each headlight until correct aim obtained

NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary
AHorizontalLoosen nut (A) and adjust for proper aimingTighten the nut securely
1Inspect wmng harness, three-prong connector, lens, base, cap screws, and socket for daIllage2Inspect all wires for corroding, pinching, and cracking3Inspect the bulb for wattage, voltage, and proper operationINSTALLING

Back to 2003 Arctic Cat ATVs from 250cc to 500cc Service Manual