2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 449Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 449

6Slide the hub wlbrake disc out of the steering knuckle and set aside7Remove the tie rod from the steering knuckle 2Inspect boots deterioration AF896D

NOTE: If boot is damaged in any way, it must be replaced with boot kit
8Remove the cap screw and lock nut securing the lower shock eyelet to the upper A-armDiscard the lock nut NOTE: Never reuse lock nutOnce lock nut has been removed, it must be replaced with new lock nut
DISASSEMBLING AXLES
1Using side-cutters (or suitable substitute),

remove the large clamp from the boot

Back to 2003 Arctic Cat ATVs from 250cc to 500cc Service Manual