2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 415Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 415

Starter Motor Assy Brush Terminal Set Brush Holder Set Spring a-Ring a-Ring Washer Set sa-Ring 9Through-Bolt 10Cap Screw 11Nut
1234567
3Align the tab on the brush holder with the notch in the starter housing; then install
0737-779

4Install the armature into the starter housing; then while holding the brushes out, slide the commutator into the brush holder
1Install the posItIve post on the positive brush assembly; then install on the starter housing

Back to 2003 Arctic Cat ATVs from 250cc to 500cc Service Manual