2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 379Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 379


3Remove the three screws securing the primer housingAccount for the diaphragm assembly, spring, and V-ring (in the housing)
5Remove the float pin
6Lift the float assembly from the carburetorAccount for the float needle valve4Remove the Phillips-head screws securing the float chamber; then remove the chamberAccount for the O-ring

Back to 2003 Arctic Cat ATVs from 250cc to 500cc Service Manual