2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 337Get this manual
3If the inner race is locked in place or rotates both directions, the drive assembly must be replacedAssembling Primary Clutch KEY
1234567Pressure Disc Driven Plate Drive Plate Sleeve Hub Primary Gear Assy Washer Washer
2Drive plate thickness must be within range of
2.92-3.08 mm (0.1149-0.1212 in3If the fiber plate tabs are damaged, the plate must be replaced4Inspect the clutch sleeve hub for grooves or notchesIf grooves or notches are present, replace the hubInspecting Starter Clutch Shoe
737-731 A
1Place the clutch hub upside down into the primary gear assembly
1Inspect the starter clutch shoe for uneven wear, chips, cracks, or burns2Inspect the groove on the shoe for wear or damage3If any damage to the shoe or any groove wear is noted, the shoe must be replaced