2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 303Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 303

BLower front: One cap screw, nut, spacer, and washer 22Loosen the clamp on the crankcase breather vent hose; then disconnect the hose and route it away from the engineUpper rear: One cap screw and nut with flat washer; then two left -side engine mount -toframe cap screws
23Remove the enginetransmission fasteners in the following sequence:

Back to 2003 Arctic Cat ATVs from 250cc to 500cc Service Manual