2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 301Get this manual
3Near the battery tray, remove the two screws securing the fuse block; then carefully remove all the wiring from the block it
CAUTION
It is critical that all wiring be marked when removing from the fuse blockThis will aid in installing correctly
4Carefully gUide the battery cables and fuse block wiring down through the access hole into the engine compartment for future removing5Drain the oil from beneath the engine transmission; then drain the cooling systemEngine! Transmission
12Remove the exhaust pipe and account for the grafoil gasket13Mark the reverse gear shaft arm to the reverse shift shaft to aid in installing and remove the cap screw securing the reverse gear shaft arm to the reverse shift shaft; then remove the lock nut securing the upper shift rod end to the shift lever armRemove the shift rod