2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 255Get this manual
Removing Left-Side Components ABCDRecoil Starter Water Pump Cover RotorFlyvvheel
4Remove the two cap screws securing the speedometer gear housing; then remove the housingAccount for the gasket
1Remove the four cap screws securing the recoil starter assembly to the left-side cover; then remove the recoil starterAccount for the gasketIf'
AT THIS POINT
To service the recoil starter, see Servicing Left-Side Components sub-section
5Loosen the clamps securing the coolant hose to the water pump; then remove the crossover tube from the cylinder headAccount for an O-ring
2Remove the flange nut securing the starter cup to the crankshaft; then remove the starter cupAccount for the O-ring inside the cup3Using cold chisel, scribe mark showing the relative position of the shift arm to the shift arm shaft to aid in installing; then remove the shift arm