2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 234Get this manual
11Install two alignment pins and place the clutch cover gasket into positionInstall the clutch cover 14Place the driven clutch assembly into position and secure with the nut (threads coated with red Loctite #271)Tighten to 10.4-11.8 kg-m (75-85 ft-lb )
MD1068 MD1115
12Tighten the clutch cover cap screws securely
15Slide the fixed drive face assembly onto the front shaftMD1117
13Install the air intake plateApply red Loctite #271 to the threads of the three Phillips-head cap screws; then install and tighten securely