2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 151Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 151

RemovingDisassembling
3Remove the nut
1Remove the cap screws securing the recoil starter assembly to the left-side cover; then remove the starter

4Slowly release the friction plate and lift the plate with ratchet guide free of the recoil case; then remove the ratchet guide from the friction plate
WARNING

During the disassembly procedure, continuous downward pressure must be exerted on the reel so it does not accidentally disengage and cause injury

Back to 2003 Arctic Cat ATVs from 250cc to 500cc Service Manual