2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 101Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 101

2Using plastic mallet, lightly tap the case halves together until cap screws can be installed3From the left side, install the shift cable bracket and the crankcase cap screws noting the location of the different-lengthed cap screws; then tighten only until snug NOTE: Rotate the shafts back and forth to ensure no binding or sticking occurs while tightening the cap screws CC488D

16On the 300, install the oil breather screen noting the direction of the tabs from disassembly
Joining Crankcase Halves

Back to 2003 Arctic Cat ATVs from 250cc to 500cc Service Manual