2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 95Get this manual

2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 95

10Slide the reverse driven gear bushing onto the shaft making sure the oil port in the bushing aligns with the oil port on the shaft CC842

CAUTION
Failure to align the oil ports will result in serious engine damage
11Move the washer in the shaft groove until the notches in the washer align with the tabs on the bushing; then slide the bushing up tight against the washer

Back to 2003 Arctic Cat ATVs from 250cc to 500cc Service Manual