2003 Arctic Cat ATVs from 250cc to 500cc Service Manual, Page 83Get this manual
MEASURING SHIFT FORK TO GROOVE (Side Clearance) 1In tum, insert each shift fork into its groove2Using feeler gauge, measure the clearance
between the shift fork and the groove
1Inspect each driven plate for warpage and bum
marks2In tum place each driven plate on the surface plate;
then using feeler gauge, measure warpage in several locationsCC292D
3Shift fork to groove side clearance must be within
specificationsSHIFT FORK TO GROOVE SIDE CLEARANCE
Engine Secondary Transmission Reverse 0.10-0.50 mm (0.004-0.020 in 0.05-0.50 mm (0.002-0.020 in 0.10-0.50 mm (0.004-0.020 in
3Maximum driven plate warpage must be 0.1 mm (0.004 in