2001 Arctic Cat ATVs factory service and repair manual, Page 401Get this manual
AF715DA
4Remove the E-ring and pin securing the reverse cable to the reverse actuator arm; then loosen the jam nut securing the lower end of the reverse cable to the frame5Loosen the jam nuts securing the upper and lower end of the reverse cable to the frame; then remove the reverse cableNOTE: It will be necessary to route the cable out of any wire forms or cable tiesINSTALLING
2Route the reverse cable from the reverse shift shaft through the frame and to the reverse shift leverNOTE: Route the reverse cable through the appropriate wire forms and secure with cable ties