2001 Arctic Cat ATVs factory service and repair manual, Page 385Get this manual
3Inspect threaded areas of all mounting bosses for stripping4Inspect the wiring harness and headlights for damage5Inspect the screen for damage or air-flow obstructionsINSTALLING
4Tighten the bumper to frame cap screws to 5.5 kg-m (40 ft-lb)Fig8-69
1Place the bumper assembly into position on the frame and start all cap screwsFinger-tighten only2Secure the belly panel to the bumper with torx-head screws and concave washersTighten to 1.1 kg-m (8 ft-lb)Fig8-67
5Connect wiring harness to each headlight assembly6Secure the wiring harnesses to the bumper assembly with cable tie (if necessary)