2001 Arctic Cat ATVs factory service and repair manual, Page 378Get this manual
11The difference in the measurements must show 6.4 mm (14 in toe-in (the front measurement 6.4 mm (14 in less than the rear measurementNOTE: The 6.4 mm (14 in toe-in difference is per side Fig8-47
12If the difference in the measurements does not show 6.4 mm (14 in toe-in, adjust both tie rods equally in until within specificationNOTE: Prior to locking the jam nuts, make sure the ball joints are at the center of their normal range of motion and at the correct angle733-559A
Body Panel Assembly Schematics