2001 Arctic Cat ATVs factory service and repair manual, Page 375Get this manual

2001 Arctic Cat ATVs factory service and repair manual, Page 375

6Install the tie rod end and secure with the nutTighten to 4.2 kg-m (30 ft-lb); then install new cotter pin and spread the pinNOTE: During assembly, new cotter pins should be installedFig8-31
9Insert the hub seal onto the shaft; then position it into the hubFig8-34

10Place the washer onto the shaft; then secure the hub assembly with the nutTighten only until snugAF759D

Back to 2001 Arctic Cat ATVs factory service and repair manual