2001 Arctic Cat ATVs factory service and repair manual, Page 360Get this manual
8Tap the ball joints out of the knuckle; then remove the knuckle9Remove the lower shock absorber eyelet from the upper A-armFig7-15
CLEANING AND INSPECTING NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary
1Clean all A-arm components in parts-cleaning solvent2Clean the ball joint mounting hole of all residual Loctite, grease, oil, or dirt for assembly purposes3Inspect the A-arm for bends, cracks, and worn bushings4Inspect the ball joint mounting holes for cracks or damage5Inspect the frame mounts for signs of damage, wear, or weldment damageAF626D