2001 Arctic Cat ATVs factory service and repair manual, Page 359Get this manual
INSTALLING
1On the right side, place the inner swing arm into position and secure it to the axle housing with cap screw and lock nutDo not tighten at this time2On the right side, place the outer swing arm into position and secure to the axle housing with cap screw and lock nutDo not tighten at this time3Secure the two right side swing arms to the frame brackets with cap screws and hex nutsDo not tighten at this time4On the left side, secure the swing arms to the axle housing and frame brackets with cap screws and hex nuts; then tighten all fasteners to 4.8 kg-m (35 ft-lb)AF701D
4Remove the brake caliperFig7-12